BKJVQ - PUR-FECT TOOL I HARDENER

Product Identification

Product ID:PUR-FECT TOOL I HARDENER
MSDS Date:11/09/1989
FSC:8030
NIIN:01-229-2659
Kit Part:Y
MSDS Number: BKJVQ

Responsible Party
CIBA-GEIGY CORPORATION FORMULATED SYSTEMS GROUP
4917 DAWN AVE.
EAST LANSING, MI 48823
US

Emergency Phone: 800-888-8372

Info Phone: 517-351-5900

Preparer: PETER HENIGE

Cage: CIBAG

Contractor
CIBA-GEIGY CORPORATION, FURANE PRODUCTS
LOS ANGELES, CA 90039 US

Telephone: 818-247-6210

Cage: CIBAG

Ingredients

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192


BARIUM SULFATE

CAS: 7727-43-7

RTECS: CR0600000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


GLASS, OXIDE *(5 MG/M3 RESPIRABLE)

CAS: 65997-17-3

OSHA PEL 5 MG/M3 RDUST *

ACGIH TLV: 10 MG/M3


SOLVENT NAPHTHA, (PETROLEUM) HEAVY AROMATIC

CAS: 64742-94-5

RTECS: SE7546500

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAUSES ALLERGIC SKIN AND EYE
IRRITATION. MAY CAUSE ALLERGIC SKIN REACTIONS.
Effects of Overexposure:CAUSES ALLERGIC SKIN AND EYE IRRITATION. MAY
CAUSE ALLERGIC SKIN REACTIONS.
Medical Cond Aggravated by Exposure:SKIN AND EYE CONDITIONS.

First Aid

First Aid:EYES:IMMEDIATELY FLUSH WITH WATER FOR 15 MIN.CALL A
DOCTOR.SKIN:WASH WITH SOAP & WATER.REMOVE CONTAMINATED CLOTHING &
LAUNDER BEFORE RE-USE.INGESTION:IF CONSCIOUS,GIVE PLENTY OF WATER
TO DRINK.DO NOT INDUCE VOMITING.CALL A PHYSICIAN.INHALATION:REMOVE
TO FRESH AIR.GIVE OXYGEN AND/OR ARTIFICIAL RESPIRATION,IF
NEEDED.CALL A DOCTOR.OTHER:REFERRAL TO A DOCTOR IS RECOMMENDED IF
THERE ARE QUESTIONS.

Fire Fighting

Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, OR WATER.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS.

Accidental Release

Spill Release Procedures:REMOVE SPILLAGE BY ABSORBING IN ABSORBENT
MATERIAL.

Handling

Handling and Storage Precautions:NUISANCE DUST MAY BE GENERATED WHEN
SANDING OR SAWING CURED MATERIAL. WARNING!CAUSES SKIN AND EYE
IRRITATION.MAY CAUSE ALLERGIC SKIN REACTION.
Other Precautions:AVOID CONTACT WITH EYES, SKIN, AND CLOTHING. AVOID
PROLONGED OR REPEATED CONTACT WITH SKIN. WASH THOROUGHLY AFTER
HANDLING.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR WHEN VAPOR/MIST EXPOSURE IS LIKELY.
Ventilation:GENERAL MECHANICAL AND LOCAL EXHAUST IN ACCORDANCE WITH
ACGIH RECOMMENDATIONS.
Protective Gloves:WEAR IMPERVIOUS GLOVES.
Eye Protection:WEAR SPLASH-PROOF CHEMICAL GOGGLES.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:400F,204C
Spec Gravity:1.79
Solubility in Water:SLIGHT
Appearance and Odor:DARK GREY, AROMATIC SOLVENT ODOR
Percent Volatiles by Volume:NEG

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS AND BASES.
Stability Condition to Avoid:EXCESSIVE HEAT FOR PROLONGED PERIODS OF
TIME.
Hazardous Decomposition Products:COMBUSTION MAY FORM TOXIC MATERIALS
SUCH AS CARBON DIOXIDE, CARBON MONOXIDE.

Disposal

Waste Disposal Methods:CONSULT QUALIFIED LOCAL OR CORPORATE PERSONNEL
FOR METHOD THAT WILL COMPLY WITH LOCAL, STATE AND FEDERAL HEALTH
AND ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.